{"title":"In-Stock Specna Arms Prime AEGs (ASTER II, Brushless Motor)","description":"\u003cp\u003eIn-stock Specna Arms Prime AEG rifles that include a GATE ASTER II unit and a brushless motor. This is a manual, in-stock-only set for shoppers comparing a new Prime rifle with upgrading an older AEG.\u003c\/p\u003e\u003cp\u003eModels in this collection when it was published (12 November 2026): SA-P19 Prime MK18 10.5 inch, SA-P26 Prime MK18, SA-P27 Prime DD RIS III 10.5 inch (black), and SA-P28 Prime DD RIS III 12.5 inch (black). Chaos Bronze colorways of the SA-P27 and SA-P28 Prime were listed but out of stock and are not included.\u003c\/p\u003e\u003cp\u003ePrices are in USD as shown on each product page. Prices were not changed. Confirm stock on the product page before ordering. For the wider Specna Arms range, see the \u003ca href=\"https:\/\/www.ehobbyasia.com\/collections\/specna-arms\"\u003eSPECNA ARMS\u003c\/a\u003e collection.\u003c\/p\u003e","products":[{"product_id":"specna-arms-daniel-defense-ris-iii-12-5-inch-airsoft-aeg-rifle-sa-p28-primeaster-ii-brushless-motor","title":"Specna Arms Daniel Defense RIS III 12.5 inch Airsoft AEG Rifle (SA-P28 Prime)ASTER II, Brushless Motor","description":"Specna Arms has meticulously crafted this airsoft gun, which externally resembles the M4\/AR\/M18 series of firearms. Its primary selling point is the significant internal upgrade featuring numerous high-quality components, eliminating the need for users to perform their own modifications and saving them the time and hassle typically associated with tuning. This positions it as a premium-tier product within the airsoft market.\u003cbr\u003e\u003cbr\u003eThis specific model is the Specna Arms Daniel Defense RIS II 12.5-inch Airsoft AEG Rifle, officially licensed by Daniel Defense. It boasts a metal receiver adorned with an engraved \"Daniel Defense\" marking and features a Picatinny rail on top. The firearm is equipped with a 320mm metal M Lok system handguard, also marked \"Daniel Defense\" and topped with a Picatinny rail, a 330mm metal outer barrel fitted with a 45mm muzzle brake, a polymer pistol grip, and a polymer crane stock complete with a rubber pad and sling sockets on both sides. The stock is mounted on a 6-position metal buffer tube.\u003cbr\u003e\u003cbr\u003eAdding to its robust build are a metal foregrip, whose skeletal structure significantly reduces weight while incorporating a hands-stop function. It comes with two polymer 125-round Mid-Cap magazines and several smaller metal components, including the Quantum 2 Series Trigger, trigger guard, two 5-slot Picatinny side rails (M Lok compatible), charging handle, fire selector, bolt catch, magazine release, forward assist, and a sling hook located at the rear of the receiver. The package is completed with a set of polymer flip-up EDGE series front and rear sights.\u003cbr\u003e\u003cbr\u003eInternally, the rifle is where the significant upgrades are most apparent. It features the AEther Gearbox with a Quick Change Spring System, a precision 6.02mm diameter by 370mm length inner barrel, a Hop-up Rotary TDC Chamber, and a Helium Flat Hop-Up Bucking. The AEther Gearbox itself contains a reinforced polymer piston with full steel teeth, an aluminum pneumatic assembly, a bearing-supported spring guide, CNC machined steel 16:1 gears, 8mm J-Cage ball bearings for the motor and piston pinion, 8mm plain bearings for the central pinion, and the powerful Specna Arms Dark Matter High-Speed 27K Brushless Motor. Crucially, it is factory-fitted with the advanced GATE ASTER II Bluetooth ETU Module.\u003cbr\u003e\u003cbr\u003eThe GATE ASTER II Bluetooth module offers extensive programmability, including 35 sensitivity settings for the Quantum 2 Trigger sensors, adjustable by the first millimeter, and 680 sensitivity settings down to the trigger reset base. It supports various firing modes such as Binary Trigger Mode, provides motor and battery protection, is compatible with brushless motors, and includes features like Pre-Cocking, Active Brake, a Low Battery Warning, and a Sniper Mode, all configurable via a Bluetooth connection to a dedicated app. This combination of licensed externals and high-performance internals makes this rifle a standout choice for enthusiasts.\u003cbr\u003e\u003cbr\u003e\u003ch3\u003e\u003cb\u003eKey Feature\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\/1 Scale High Power Assembled Gas Powered Airsoft GBB\u003c\/li\u003e\n\u003cli\u003eOfficially licensed Daniel Defense airsoft AEG rifle\u003c\/li\u003e\n\u003cli\u003ePremium-grade product with extensive internal upgrades, eliminating the need for aftermarket modifications\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch5\u003e\u003cb\u003e\u003cu\u003eExternals\u003c\/u\u003e\u003c\/b\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMetal receiver with engraved \"Daniel Defense\" markings and Picatinny rail on top\u003c\/li\u003e\n\u003cli\u003e320mm metal M Lok system handguard with \"Daniel Defense\" markings and Picatinny top rail\u003c\/li\u003e\n\u003cli\u003e330mm metal outer barrel with 45mm muzzle brake (14mm CCW)\u003c\/li\u003e\n\u003cli\u003eSkeletal metal foregrip with integrated hands-stop function\u003c\/li\u003e\n\u003cli\u003ePolymer pistol grip\u003c\/li\u003e\n\u003cli\u003ePolymer crane stock with rubber pad, dual-sided sling sockets, and 6-position metal buffer tube\u003c\/li\u003e\n\u003cli\u003eMetal Quantum 2 Series Trigger and metal trigger guard\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x metal 5-slot Picatinny side rails (M Lok compatible)\u003c\/li\u003e\n\u003cli\u003eMetal charging handle, fire selector, bolt catch, magazine release, forward assist\u003c\/li\u003e\n\u003cli\u003eMetal sling hook located at receiver rear\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePolymer flip-up EDGE series front and rear sights\u003c\/li\u003e\n\u003cli\u003e2x polymer 125-round Mid-Cap magazines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e\n\u003ch5\u003e\u003cu\u003e\u003cb\u003eInternals\u003c\/b\u003e\u003c\/u\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAEther Gearbox with Quick Change Spring System\u003c\/li\u003e\n\u003cli\u003e6.02mm diameter x 370mm length precision inner barrel\u003c\/li\u003e\n\u003cli\u003eHop-up Rotary TDC Chamber with Helium Flat Hop-Up Bucking\u003c\/li\u003e\n\u003cli\u003eReinforced polymer piston with full steel teeth\u003c\/li\u003e\n\u003cli\u003eAluminum pneumatic assembly\u003c\/li\u003e\n\u003cli\u003eBearing-supported spring guide\u003c\/li\u003e\n\u003cli\u003eCNC machined steel 16:1 gears\u003c\/li\u003e\n\u003cli\u003e8mm J-Cage ball bearings for motor and piston pinion\u003c\/li\u003e\n\u003cli\u003e8mm plain bearings for central pinion\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpecna Arms Dark Matter High-Speed 27K Brushless Motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e\n\u003ch5\u003e\u003cb\u003e\u003cu\u003eElectronics\u003c\/u\u003e\u003c\/b\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFactory-fitted GATE ASTER II Bluetooth ETU Module\u003c\/li\u003e\n\u003cli\u003e35 sensitivity settings for Quantum 2 Trigger sensors\u003c\/li\u003e\n\u003cli\u003eAdjustable sensitivity down to trigger reset base\u003c\/li\u003e\n\u003cli\u003eBinary Trigger Mode support\u003c\/li\u003e\n\u003cli\u003eMotor and battery protection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBrushless motor compatible\u003c\/li\u003e\n\u003cli\u003ePre-Cocking and Active Break functions\u003c\/li\u003e\n\u003cli\u003eLow Battery Warning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSniper Mode capability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFull Bluetooth connectivity to dedicated app for configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\u003c\/ul\u003e","brand":"Specna Arms","offers":[{"title":"Default Title","offer_id":48486666895588,"sku":"SA-P28-BK-BM-AS2","price":422.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1325\/2580\/files\/SA-P28-BK-BM-AS2-4ee.jpg?v=1773739416"},{"product_id":"specna-arms-daniel-defense-mk18-airsoft-aeg-rifle-sa-p26-prime-w-aster-ii-brushless-motor","title":"Specna Arms Daniel Defense MK18 Airsoft AEG Rifle (SA-P26 Prime) w\/ ASTER II, Brushless Motor","description":"\u003ch5\u003e\u003cu\u003eReal Steel Background\u003c\/u\u003e\u003c\/h5\u003e\u003cp\u003eThe Daniel Defense MK18 is a close-quarters battle (CQB) variant of the M4 carbine platform, developed for the United States Special Operations Command (USSOCOM) under the SOPMOD Block II program. The MK18 is defined by its 10.3-inch barrel and the Daniel Defense RIS II handguard ? a free-floating quad-rail system that replaced the earlier Knight's Armament RAS on SOPMOD-configured weapons. The RIS II was selected by the Naval Surface Warfare Center Crane Division (NSWC Crane) after rigorous testing, chosen for its superior rigidity, heat dissipation, and ability to maintain zero on mounted accessories under sustained combat use. The MK18 was specifically designed for Close Quarters Battle applications where maneuverability in confined spaces ? vehicles, buildings, and aircraft ? is paramount, while still retaining the terminal ballistic effectiveness of the 5.56mm NATO cartridge at short to medium ranges.\u003c\/p\u003e\u003cp\u003eThe MK18 has been fielded extensively by US Navy SEALs, Delta Force, and other special mission units, as well as by allied special operations forces worldwide. Its compact dimensions, robust rail system, and compatibility with the full spectrum of SOPMOD accessories have made it one of the most recognizable and sought-after CQB weapon configurations in modern military service. The Daniel Defense RIS II handguard, with its distinctive engraved markings andbolt-up mounting system, has become an iconic visual element that immediately identifies the MK18 platform, making it a favorite among airsoft collectors and military enthusiasts seeking the most authentic representation of the special operations CQB carbine.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch5\u003e\u003cu\u003eProduct Details\u003c\/u\u003e\u003c\/h5\u003e\u003cp\u003eManufactured by Specna Arms under the SA-P26 Prime series in official Daniel Defense licensing, this AEG rifle faithfully reproduces the MK18 CQB carbine in a high-performance airsoft package. The rifle is built around a metal upper receiver featuring an integral Picatinny rail along the top for optics mounting, paired with a metal lower receiver engraved with \"Daniel Defense\" markings that authenticate the platform's law enforcement and military heritage. The 320mm RIS Rail system features the Daniel Defense MK18 RIS II handguard ? a free-floating quad-rail configuration engraved with \"Daniel Defense\" markings, faithfully reproducing the distinctive rail system that defines the real steel MK18 platform and providing four full-length Picatinny rail surfaces for accessory mounting.\u003c\/p\u003e\u003cp\u003eThe 340mm metal outer barrel is fitted with a 45mm muzzle brake, reproducing the MK18's 10.3-inch barrel profile and compensator configuration. A polymer pistol grip provides ergonomic comfort, while the polymer crane stock features a rubber stock pad for secure shoulder contact, sling sockets on both sides for versatile sling attachment, and a six-position stock pipe for adjustable length of pull. A polymer foregrip is included for enhanced weapon control during CQB engagement, and a polymer BB loader is included in the package for convenient magazine reloading. Two polymer 125mm S-Mag magazines are included, offering lightweight mid-capacity feeding with the distinctive Specna Arms S-Mag design.\u003c\/p\u003e\u003cp\u003eA comprehensive suite of metal and polymer small parts completes the external package. Polymer Specna Arms Core\/Edge flip-up front and rear sights provide a reliable backup sighting system that folds flat when optics are mounted. The metal flat trigger features a skeletal internal structure that significantly reduces weight, with a serrated surface texture enabling faster, more positive trigger engagement. A metal trigger guard, metal fire selector, metal bolt catch, and metal magazine release round out the metal controls, while a steel sling swivel mount is positioned at the rear of the receiver for secure single-point sling attachment.\u003c\/p\u003e\u003cp\u003eInternally, the rifle is built around the ESA2 quick spring change system, with M90, M120 (It has been installed inside the gun) , and M135 springs included in the package for out-of-the-box adaptability to different field velocity limits. The inner barrel is a steel 6.02mm tight-bore specification for enhanced accuracy and consistency. The AEther gearbox incorporates a comprehensive suite of premium internals: a reinforced polymer piston with full steel teeth for durability under high-rate-of-fire cycling, an aluminum pneumatic assembly for efficient air seal, a bearing-supported spring guide for smooth compression, CNC machined steel 16:1 gears for precise ratio reduction, 8mm J-cage ball bearings for the motor and piston pinion, and 8mm plain bearings for the central pinion. The Quantum 2 Series trigger provides crisp, low-resistance electrical switching.\u003c\/p\u003e\u003cp\u003ePowering the system is the Specna Arms Dark Matter High-Speed 27K Brushless Motor, delivering high torque and rapid cyclic response with the efficiency and longevity inherent to brushless motor design. The rifle is factory-fitted with a GATE ASTER II Bluetooth ETU module, providing advanced electronic trigger unit functionality including Quantum 2 trigger sensors with 35 sensitivity settings adjustable by the first millimetre of trigger pull and 680 sensitivity settings down to trigger reset base, binary trigger mode for semi-auto pull-and-release firing, motor and battery protection circuitry, full brushless motor compatibility, pre-cock setting for reduced mechanical delay, active brake for immediate cycle stoppage, low battery warning, sniper mode for precision single-shot operation, and Bluetooth connectivity to the GATE Control Station app for wireless configuration and firmware updates.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOfficially licensed Daniel Defense MK18 replica manufactured by Specna Arms under the SA-P26 Prime series, delivering authentic \"Daniel Defense\" engraved markings on both the RIS II handguard and lower receiver for verified platform authenticity\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal 320mm RIS II handguard engraved with \"Daniel Defense\" markings, faithfully reproducing the free-floating quad-rail system that defines the MK18 CQB platform and providing four full-length Picatinny rail surfaces for accessory mounting\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal 340mm outer barrel paired with a 45mm muzzle brake, reproducing the MK18's distinctive 10.3-inch barrel profile and compensator configuration for authentic visual proportion and muzzle device appearance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal upper receiver with integral Picatinny rail along the top for direct optics mounting, providing a rigid and secure platform for scope mounts, red dots, and magnified optics without additional adapter rails\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal lower receiver engraved with \"Daniel Defense\" markings, authenticating the platform's military and law enforcement heritage with verified manufacturer branding\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePolymer crane stock with rubber stock pad, sling sockets on both sides for versatile two-point sling attachment, and a six-position stock pipe for adjustable length of pull accommodating different shooter builds and gear configurations\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePolymer foregrip included for enhanced weapon control during close-quarters engagement, providing a comfortable angled grip surface that aids target acquisition and weapon manipulation in confined spaces\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTwo polymer 125mm S-Mag magazines included, offering lightweight mid-capacity feeding with the distinctive Specna Arms S-Mag design that eliminates rattle and provides reliable feeding without winding\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePolymer BB loader included in the package, providing a convenient tool for rapid magazine reloading in the field without manual round-by-round loading\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePolymer Specna Arms Core\/Edge flip-up front and rear sights providing a reliable backup sighting system that folds flat when optics are mounted and deploys quickly when primary optics are unavailable\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal flat trigger with a skeletal internal structure that significantly reduces weight, featuring a serrated surface texture that enables faster and more positive trigger engagement for improved shot-to-shot responsiveness\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal trigger guard, metal fire selector, metal bolt catch, and metal magazine release delivering positive tactile feedback and durable operation across all critical weapon controls\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSteel sling swivel mount positioned at the rear of the receiver, providing a secure single-point sling attachment point for CQB-style weapon retention and transitions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eESA2 quick spring change system with M90, M120 (It has been installed inside the gun.), and M135 springs included, enabling rapid muzzle velocity adjustment for different field limits without disassembling the gearbox\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSteel 6.02mm tight-bore inner barrel delivering enhanced BB stabilization, improved accuracy, and consistent shot-to-shot grouping through reduced barrel clearance and precise bore specification\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReinforced polymer piston with full steel teeth engineered for durability under high-rate-of-fire cycling, with the steel tooth section providing wear resistance at the critical gear-to-piston engagement interface\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAluminum pneumatic assembly providing efficient and consistent air seal between cylinder head, nozzle, and piston head for reliable shot-to-shot velocity consistency\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCNC machined steel 16:1 gears delivering precise ratio reduction with high-strength steel construction for sustained durability under high-speed motor output\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBearing-supported spring guide and 8mm J-cage ball bearings for motor and piston pinion providing smooth, low-friction rotation that reduces mechanical resistance and extends component lifespan\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpecna Arms Dark Matter High-Speed 27K brushless motor delivering high torque and rapid cyclic response with the efficiency, consistency, and extended operational lifespan inherent to brushless motor design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFactory-fitted GATE ASTER II Bluetooth ETU module providing comprehensive electronic trigger unit functionality with Quantum 2 trigger sensors offering 35 sensitivity settings adjustable by the first millimetre of trigger pull and 680 settings down to trigger reset base for maximum trigger response customization\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBinary trigger mode enabling semi-automatic firing on both trigger pull and release, effectively doubling the semi-auto cyclic rate for rapid target engagement scenarios\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMotor and battery protection circuitry safeguarding the electrical system from overcurrent, undervoltage, and short-circuit conditions to preserve the longevity of the brushless motor and ETU module\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePre-cock setting reducing mechanical delay between trigger pull and piston release by pre-positioning the piston sector gear, delivering near-instantaneous trigger response critical for competitive and precision shooting\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eActive brake function immediately stopping motor rotation upon trigger release, preventing overspin that could cause double shots or inconsistent semi-auto cycling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLow battery warning providing audible or electronic notification when battery voltage drops below safe operating thresholds, preventing damage to the battery pack and ensuring consistent performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSniper mode optimizing the ETU for precision single-shot operation with customized trigger response and cycle parameters tailored for marksmanship scenarios\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBluetooth connectivity to the GATE Control Station app enabling wireless configuration, sensitivity adjustment, firmware updates, and diagnostic monitoring from a smartphone or tablet without disassembling the rifle\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Specna Arms","offers":[{"title":"Default Title","offer_id":49485565493476,"sku":"SA-P26-BK-BM-AS2","price":422.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1325\/2580\/files\/SA-P26-BK-BM-AS2-cover.jpg?v=1784776992"},{"product_id":"specna-arms-dd-ris-iii-10-5-inch-airsoft-aeg-rifle-sa-p27-primeaster-ii-brushless-motor","title":"Specna Arms DD RIS III 10.5 inch Airsoft AEG Rifle (SA-P27 Prime)ASTER II, Brushless Motor","description":"\u003cp\u003eSpecna Arms has meticulously crafted this airsoft gun, which externally \r\nresembles the M4\/AR\/M18 series of firearms. Its primary selling point is\r\n the significant internal upgrade featuring numerous high-quality \r\ncomponents, eliminating the need for users to perform their own \r\nmodifications and saving them the time and hassle typically associated \r\nwith tuning. This positions it as a premium-tier product within the \r\nairsoft market.\u003cbr\u003e\u003cbr\u003eThis specific model is the Specna Arms Daniel \r\nDefense RIS II 10.5-inch Airsoft AEG Rifle, officially licensed by \r\nDaniel Defense. It boasts a metal receiver adorned with an engraved \r\n\"Daniel Defense\" marking and features a Picatinny rail on top. The \r\nfirearm is equipped with a 320mm metal M Lok system handguard, also \r\nmarked \"Daniel Defense\" and topped with a Picatinny rail, a 330mm metal \r\nouter barrel fitted with a 45mm muzzle brake, a polymer pistol grip, and\r\n a polymer crane stock complete with a rubber pad and sling sockets on \r\nboth sides. The stock is mounted on a 6-position metal buffer tube.\u003cbr\u003e\u003cbr\u003eAdding\r\n to its robust build are a metal foregrip, whose skeletal structure \r\nsignificantly reduces weight while incorporating a hands-stop function. \r\nIt comes with two polymer 125-round Mid-Cap magazines and several \r\nsmaller metal components, including the Quantum 2 Series Trigger, \r\ntrigger guard, two 5-slot Picatinny side rails (M Lok compatible), \r\ncharging handle, fire selector, bolt catch, magazine release, forward \r\nassist, and a sling hook located at the rear of the receiver. The \r\npackage is completed with a set of polymer flip-up EDGE series front and\r\n rear sights.\u003cbr\u003e\u003cbr\u003eInternally, the rifle is where the significant \r\nupgrades are most apparent. It features the AEther Gearbox with a Quick \r\nChange Spring System, a precision 6.02mm diameter by 370mm length inner \r\nbarrel, a Hop-up Rotary TDC Chamber, and a Helium Flat Hop-Up Bucking. \r\nThe AEther Gearbox itself contains a reinforced polymer piston with full\r\n steel teeth, an aluminum pneumatic assembly, a bearing-supported spring\r\n guide, CNC machined steel 16:1 gears, 8mm J-Cage ball bearings for the \r\nmotor and piston pinion, 8mm plain bearings for the central pinion, and \r\nthe powerful Specna Arms Dark Matter High-Speed 27K Brushless Motor. \r\nCrucially, it is factory-fitted with the advanced GATE ASTER II \r\nBluetooth ETU Module.\u003cbr\u003e\u003cbr\u003eThe GATE ASTER II Bluetooth module offers \r\nextensive programmability, including 35 sensitivity settings for the \r\nQuantum 2 Trigger sensors, adjustable by the first millimeter, and 680 \r\nsensitivity settings down to the trigger reset base. It supports various\r\n firing modes such as Binary Trigger Mode, provides motor and battery \r\nprotection, is compatible with brushless motors, and includes features \r\nlike Pre-Cocking, Active Brake, a Low Battery Warning, and a Sniper \r\nMode, all configurable via a Bluetooth connection to a dedicated app. \r\nThis combination of licensed externals and high-performance internals \r\nmakes this rifle a standout choice for enthusiasts.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cb\u003eKey Feature\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\/1 Scale High Power Assembled Gas Powered Airsoft GBB\u003c\/li\u003e\n\u003cli\u003eOfficially licensed Daniel Defense airsoft AEG rifle\u003c\/li\u003e\n\u003cli\u003ePremium-grade product with extensive internal upgrades, eliminating the need for aftermarket modifications\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch5\u003e\u003cb\u003e\u003cu\u003eExternals\u003c\/u\u003e\u003c\/b\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMetal receiver with engraved \"Daniel Defense\" markings and Picatinny rail on top\u003c\/li\u003e\n\u003cli\u003e270mm metal M Lok system Black Color handguard with \"Daniel Defense\" markings and Picatinny top rail\u003c\/li\u003e\n\u003cli\u003e270mm metal outer barrel with 45mm muzzle brake (14mm CCW)\u003c\/li\u003e\n\u003cli\u003eSkeletal metal foregrip with integrated hands-stop function\u003c\/li\u003e\n\u003cli\u003ePolymer pistol grip\u003c\/li\u003e\n\u003cli\u003ePolymer crane stock with rubber pad, dual-sided sling sockets, and 6-position metal buffer tube\u003c\/li\u003e\n\u003cli\u003eMetal Quantum 2 Series Trigger and metal trigger guard\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x metal 5-slot Picatinny side rails (M Lok compatible)\u003c\/li\u003e\n\u003cli\u003eMetal charging handle, fire selector, bolt catch, magazine release, forward assist\u003c\/li\u003e\n\u003cli\u003eMetal sling hook located at receiver rear\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePolymer flip-up EDGE series front and rear sights\u003c\/li\u003e\n\u003cli\u003e2x polymer 125-round Mid-Cap magazines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e\n\u003ch5\u003e\u003cu\u003e\u003cb\u003eInternals\u003c\/b\u003e\u003c\/u\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAEther Gearbox with Quick Change Spring System\u003c\/li\u003e\n\u003cli\u003e6.02mm diameter x 370mm length precision inner barrel\u003c\/li\u003e\n\u003cli\u003eHop-up Rotary TDC Chamber with Helium Flat Hop-Up Bucking\u003c\/li\u003e\n\u003cli\u003eReinforced polymer piston with full steel teeth\u003c\/li\u003e\n\u003cli\u003eAluminum pneumatic assembly\u003c\/li\u003e\n\u003cli\u003eBearing-supported spring guide\u003c\/li\u003e\n\u003cli\u003eCNC machined steel 16:1 gears\u003c\/li\u003e\n\u003cli\u003e8mm J-Cage ball bearings for motor and piston pinion\u003c\/li\u003e\n\u003cli\u003e8mm plain bearings for central pinion\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpecna Arms Dark Matter High-Speed 27K Brushless Motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003ch5\u003e\u003cb\u003e\u003cu\u003eElectronics\u003c\/u\u003e\u003c\/b\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFactory-fitted GATE ASTER II Bluetooth ETU Module\u003c\/li\u003e\n\u003cli\u003e35 sensitivity settings for Quantum 2 Trigger sensors\u003c\/li\u003e\n\u003cli\u003eAdjustable sensitivity down to trigger reset base\u003c\/li\u003e\n\u003cli\u003eBinary Trigger Mode support\u003c\/li\u003e\n\u003cli\u003eMotor and battery protection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBrushless motor compatible\u003c\/li\u003e\n\u003cli\u003ePre-Cocking and Active Break functions\u003c\/li\u003e\n\u003cli\u003eLow Battery Warning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSniper Mode capability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFull Bluetooth connectivity to dedicated app for configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Specna Arms","offers":[{"title":"Default Title","offer_id":49642934370532,"sku":"SA-P27-BK-BM-AS2","price":431.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1325\/2580\/files\/SA-P27-BK-BM-AS2-cover.jpg?v=1786607656"},{"product_id":"specna-arms-daniel-defense-mk18-airsoft-aeg-rifle-sa-p19-prime-10-5-inch-w-aster-ii-brushless-motor","title":"Specna Arms Daniel Defense MK18 Airsoft AEG Rifle (SA-P19 Prime, 10.5 inch) w\/ASTER II, Brushless Motor","description":"\u003ch5\u003e\u003cu\u003eReal Steel Background\u003c\/u\u003e\u003c\/h5\u003e\u003cp\u003eThe Mk 18 carbine traces its lineage to the Close Quarters Battle Receiver (CQBR) programme administered by the Naval Surface Warfare Center Crane Division for U.S. Special Operations Command in the late 1990s. Developed at the request of U.S. Navy Special Warfare ? most visibly the SEAL community ? the CQBR was not a brand-new rifle but an upper-receiver conversion: a 10.3-inch barrel assembly mounted on a converted M4A1 lower receiver, effectively shrinking the standard M4A1 carbine into a compact personal-defence weapon optimised for ship boarding, vehicle operations, and close-quarters room clearing. The configuration was standardised and fielded as the Mk 18 Mod 0, becoming the signature close-quarters carbine of the Naval Special Warfare community and, later, DEVGRU. The subsequent Mk 18 Mod 1 retained the 10.3-inch barrel but adopted a free-floating Daniel Defense RIS II handguard, the quad-rail look most associated with the platform in its modern guise. Daniel Defense itself was founded in 2002 by Marty Daniel in Black Creek, Georgia, and grew from a specialist rail maker into one of America's most respected manufacturers of modern rifles; its RIS II free-float quad rail was selected for the Mk 18 Mod 1 and the SOPMOD Block II programme, and that handguard's distinctive profile became inseparable from the Mk 18 silhouette. Chambered in 5.56x45mm NATO and built around the proven direct-impingement AR-15 architecture, the Mk 18 traded long-range ballistic reach for an exceptionally short, manoeuvrable package that could be swung through doorways and hatches without snagging. Its unmistakable flat-top upper, stubby barrel, and signature rail made it a fixture of special-operations imagery, and the Mk 18 went on to become one of the most recognisable carbines in popular culture through its appearances in military films and tactical shooter video games. Decades after its introduction, the compact Mk 18 remains the benchmark for the CQB carbine concept and a perennial favourite among shooters who value compactness and the operator aesthetic.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch5\u003e\u003cu\u003eProduct Details\u003c\/u\u003e\u003c\/h5\u003e\u003cp\u003eSpecna Arms, the Polish manufacturer whose PRIME series sits at the top of its AEG line-up, delivers the Daniel Defense MK18 as the SA-P19 ? a reproduction of the SEALs' compact carbine built around the company's AEther gearbox and a factory-fitted GATE ASTER II Bluetooth MOSFET. Positioned as a flagship, the PRIME series pairs full-metal externals with a specification list normally reserved for custom builds, and the SA-P19 arrives ready to compete straight out of the box.\u003c\/p\u003e\u003cp\u003eExternally, the rifle is built around a metal upper receiver engraved with \"MK17\" and \"5.56\" markings, paired with a metal lower receiver carrying the Daniel Defense logo. The front end consists of a metal 245mm MK18 free-float handguard surrounding a metal 245mm outer barrel finished with a 45mm muzzle brake, giving the compact 10.5-inch carbine its recognisable proportions. Furniture is polymer throughout: a crane stock with a rubber stock pad, sling sockets on both sides, and a six-position stock pipe, joined by a polymer pistol grip and a polymer fore grip. Feeding is handled by two Specna Arms SMAG magazines, each holding 125 rounds, so the rifle ships with a spare ready to go.\u003c\/p\u003e\u003cp\u003eThe control set mixes metal and steel components. A metal bolt catch, magazine release, fire selector, forward assist, and charging handle work alongside a steel dust cover, a steel bolt carrier, and steel receiver pins, while a steel sling swivel sits at the rear of the receiver between the receiver and the stock tube. The flat metal trigger is serrated for a slip-free finger surface and skeletonised to cut its mass, and it sits within a metal trigger guard. Flip-up front and rear sights are moulded in polymer and fold flat when an optic is mounted.\u003c\/p\u003e\u003cp\u003eInternally, the rifle runs the AEther gearbox with a quick-change spring system. Inside it, a reinforced polymer piston with a full steel tooth rack works with an aluminium pneumatic assembly and a bearing-supported spring guide, driven by CNC-machined steel 16:1 gears turning on 8mm J-Cage ball bearings for the motor and piston pinion with 8mm plain bearings on the centre pinion. Power comes from the Specna Arms Dark Matter high-speed 27K brushless motor, working with the Quantum 2 series trigger and governed by a factory-fitted GATE ASTER II Bluetooth ETU module. That unit brings an extensive feature set: Quantum 2 trigger sensors offering 35 sensitivity settings across the first millimetre of pull and 680 settings down to trigger reset, binary trigger mode, motor and battery protection, brushless motor compatibility, pre-cocking, active brake, low battery warning, sniper mode, and Bluetooth connection to the GATE app so every parameter can be configured from a phone. Accuracy is served by a 6.02mm by 370mm inner barrel running in a rotary TDC hop-up chamber fitted with a Helium flat hop-up bucking. Power is supplied by a Li-Po battery stowed in the stock tube at the rear, accessed by extending the stock. The combination of licensed Daniel Defense styling, full-metal construction, a reinforced AEther drivetrain, and flagship GATE electronics makes the SA-P19 a genuinely high-end AEG in factory trim.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMetal 245mm MK18 free-float handguard reproducing the distinctive Daniel Defense rail profile and providing a rigid, undisturbed mounting platform for accessories\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal 245mm outer barrel fitted with a 45mm muzzle brake, delivering the compact 10.5-inch carbine proportions and a finished muzzle suited to short-barrel use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal upper receiver engraved with \"MK17\" and \"5.56\" markings, faithfully reproducing the factory rollmarks of the original\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal lower receiver engraved with the Daniel Defense logo marking, completing the authentic receiver detailing\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePolymer crane stock fitted with a rubber stock pad, sling sockets on both sides, and a six-position stock pipe for adjustable length of pull and flexible sling attachment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePolymer pistol grip shaped for a comfortable, secure hold that helps manage the rifle during sustained fire\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePolymer fore grip giving a stable forward hold and improved control over the compact carbine\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTwo included Specna Arms SMAG magazines each holding 125 rounds, supplying generous capacity and a spare magazine straight out of the box\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePolymer flip-up front and rear sights that fold flat against the receiver when an optic is mounted and spring up for instant back-up use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal flat trigger finished with a serrated surface for a slip-free finger contact and skeletonised to reduce its mass, housed within a metal trigger guard\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal bolt catch, magazine release, fire selector, forward assist, and charging handle delivering durable, authentic controls for everyday use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSteel dust cover, steel bolt carrier, and steel receiver pins adding strength and realistic detail to the receiver assembly\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSteel sling swivel mounted at the rear of the receiver between the receiver and the stock tube, providing a solid attachment point for sling carry\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAEther gearbox built with a quick-change spring system, letting the main spring be swapped without a full teardown so muzzle energy can be tuned for different field limits\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReinforced polymer piston with a full steel tooth rack working with an aluminium pneumatic assembly and a bearing-supported spring guide for reliable, durable cycling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCNC-machined steel 16:1 gears running on 8mm J-Cage ball bearings for the motor and piston pinion with 8mm plain bearings on the centre pinion, balancing durability with smooth operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSpecna Arms Dark Matter high-speed 27K brushless motor paired with the Quantum 2 series trigger, delivering strong torque, high efficiency, and long service life\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFactory-fitted GATE ASTER II Bluetooth ETU module offering Quantum 2 trigger sensors with 35 sensitivity settings across the first millimetre of pull and 680 settings down to trigger reset, alongside binary trigger mode, pre-cocking, active brake, sniper mode, motor and battery protection, brushless motor compatibility, low battery warning, and app-based configuration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e6.02mm by 370mm inner barrel paired with a rotary TDC hop-up chamber and a Helium flat hop-up bucking, delivering consistent accuracy and stable, easily tuned backspin\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBattery compartment located in the stock tube at the rear, accessed by extending the stock so the Li-Po can be installed cleanly inside the rifle\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Specna Arms","offers":[{"title":"Default Title","offer_id":49934682095844,"sku":"SA-P19-BK-BM-AS2","price":435.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1325\/2580\/files\/SA-P19-BK-BM-AS2-cover.jpg?v=1790058124"}],"url":"https:\/\/www.ehobbyasia.com\/zh\/collections\/in-stock-specna-arms-prime-aegs-aster-ii-brushless-motor.oembed","provider":"eHobbyAsia","version":"1.0","type":"link"}