{"product_id":"tanaka-stainless-finish-6-inch-smolt-gas-revolver-square-butt-grip-ver-3","title":"Tanaka Stainless Finish 6 inch Smolt Gas Revolver (Square Butt Grip\/ Ver. 3)","description":"\u003ch5\u003e\u003cu\u003eReal Steel Background\u003c\/u\u003e\u003c\/h5\u003e\u003cp\u003eAmong revolver enthusiasts, few firearms carry the mystique of the Smolt ? the famous hybrid revolver that married the barrel of a Colt Python to the frame of a Smith \u0026amp; Wesson. Born in the custom gun shops of the late 1970s and 1980s, the concept was simple and irresistible: take the Python's legendary full-underlug ventilated-rib barrel, widely regarded as the most accurate and best-looking revolver barrel ever made, and fit it to a Smith \u0026amp; Wesson revolver frame with its beloved action and trigger. The portmanteau name ? \"Sm\" from Smith \u0026amp; Wesson and \"olt\" from Colt ? captured exactly what the gun was: a Frankenstein creation in the best sense, combining the finest attributes of America's two great revolver makers in a single firearm. Custom gunsmiths produced them in limited numbers, typically built on stainless S\u0026amp;W .357 Magnum revolvers with the Python's 6-inch barrel and shroud grafted on, and demand always outran supply. Because they began as hand-built conversions, no two batches were quite alike, and genuine Smolts remain prized collector's pieces today ? a testament to an era when American custom gunsmithing could blend two factories' best work into something neither could offer alone. The 6-inch barrel with square butt grip configuration is the classic Smolt layout: a compact, balanced sixgun with the Python face and the S\u0026amp;W stance.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch5\u003e\u003cu\u003eProduct Details\u003c\/u\u003e\u003c\/h5\u003e\u003cp\u003eTanaka, the Japanese manufacturer revered among airsoft collectors for its high-end gas revolvers, reproduces this legendary hybrid as the Smolt gas revolver in the company's Ver.3 specification. The revolver's bodywork is executed in polymer with a zinc-powder-reinforced structure, and the Stainless Finish treatment is a surface decoration craft that simulates the appearance and texture of stainless steel, giving what is technically polymer construction the convincing realism of genuine metal hardware. The result reads as bright, brushed stainless at a glance and in the hand, while keeping the structure light and durable.\u003c\/p\u003e\u003cp\u003eThe \"Stainless Finish\" 130mm outer barrel is engraved with the \"PYTHON .357\" marking ? the Python barrel's own rollmark, exactly as befits a hybrid that wears the Python's famous front end ? and the Stainless Finish frame carries the engraved \"S\u0026amp;W\" logo marking, faithfully recreating the two-maker character of the original Smolt. The metal cylinder is able to hold 12 rounds of 6mm BBs, with the gas charging port located at the rear of the cylinder. The grip is a polymer square butt grip with a wood texture finish, moulded with the classic diamond-shaped non-slip checkering and bearing the silver \"S\u0026amp;W\" logo medallion ? the square butt configuration giving the compact 6-inch revolver its traditional shorter, boxier stance.\u003c\/p\u003e\u003cp\u003eThe small parts are finished in metal: the curve trigger, cylinder release, hammer, and both front and rear sights are all constructed in metal for realistic weight and positive engagement. Internally, the revolver runs a double-action trigger system ? pull the trigger through its full stroke for rapid revolver fire ? built on the Pegasus Cylinder System, Tanaka's gas revolver platform that stores BBs directly in the cylinder and charges gas through the port at its rear. Power comes from HFC134a gas, delivering consistent revolver performance shot after shot. As with any airsoft replica, appropriate eye protection should always be worn, and local regulations on airsoft ownership and use must be observed.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePolymer bodywork with a zinc-powder-reinforced structure, finished with the \"Stainless Finish\" surface decoration craft that simulates the appearance and texture of real stainless steel for convincing realism at a glance and in the hand\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eManufactured by Tanaka Works, the Japanese maker revered among airsoft collectors for its high-end, precisely engineered gas revolvers\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFaithful 1:1 reproduction of the legendary Smolt ? the famous hybrid revolver that married a Colt Python barrel to a Smith \u0026amp; Wesson frame\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e\"Stainless Finish\" 130mm outer barrel engraved with the \"PYTHON .357\" marking, faithfully recreating the Python barrel's own rollmark on the hybrid's front end\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e\"Stainless Finish\" frame engraved with the \"S\u0026amp;W\" logo marking, completing the two-maker character of the original Smolt\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal cylinder able to hold 12 rounds of 6mm BBs, with the gas charging port located at the rear of the cylinder for quick, convenient refills\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePolymer square butt grip with a wood texture finish, moulded with the classic diamond-shaped non-slip checkering and bearing the silver \"S\u0026amp;W\" logo medallion\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal curve trigger delivering a crisp, consistent pull that stands up to repeated firing\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal cylinder release providing durable, positive operation during loading and unloading\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal hammer for authentic cocking action and hammer-fired detailing\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMetal front and rear sights delivering a fully functional sighting set on the compact 6-inch barrel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDouble-action trigger system offering rapid trigger-cycled revolver fire\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePegasus Cylinder System storing BBs directly in the cylinder and charging gas at the cylinder's rear, Tanaka's refined gas revolver platform built for realistic operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePowered by HFC134a gas, delivering consistent revolver performance shot after shot\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Tanaka Works","offers":[{"title":"Default Title","offer_id":68384454705380,"sku":"TNK-4537212013109","price":230.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1325\/2580\/files\/TNK-4537212013109-3e.jpg?v=1795073129","url":"https:\/\/www.ehobbyasia.com\/ko\/products\/tanaka-stainless-finish-6-inch-smolt-gas-revolver-square-butt-grip-ver-3","provider":"eHobbyAsia","version":"1.0","type":"link"}