{"product_id":"maxx-model-cnc-hopup-chamber-me-pro-for-m4-m16-aeg-airsoft-rifle-except-kwa","title":"MAXX Model CNC Hopup Chamber ME-PRO for M4\/M16 AEG Airsoft Rifle (Except KWA)","description":"\u003cp\u003eCNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit is precisely made to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4\/M16 Standard AEG series.\u003cbr data-mce-fragment=\"1\"\u003eThe Hopup Chamber ME unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.\u003cbr data-mce-fragment=\"1\"\u003eThe Hopup Chamber ME unit is designed to accept the nozzle length from 21.00mm to 21.25mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.\u003cbr data-mce-fragment=\"1\"\u003eThe Hopup Chamber ME Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to any V2 gear boxes with 11mm or 11.5mm inner bore.\u003cbr data-mce-fragment=\"1\"\u003eMore than that, the Hopup Chamber ME Pro unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine. The Latching System can be also manually opened to release BBs from inside hopup chamber by hand.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e***The Dual UV LED Boards and Module set and Single UV LED Board w\/ Clear Cover and Module set are optional add-ons to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)\u003cbr data-mce-fragment=\"1\"\u003e***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor\/HPA firing when the magazine is empty. (Sold separately)\u003cbr data-mce-fragment=\"1\"\u003e***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMAXX Model CNC Hopup Chamber ME-PRO for M4\/M16 AEG Airsoft Rifle (Except KWA)\u003c\/strong\u003e\u003cbr\u003eCNC 6061 Aluminum Construction\u003cbr\u003eDesign For Replace the Original Hop up Chamber\u003cbr\u003eMachined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability\u003cbr data-mce-fragment=\"1\"\u003eImproved accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4\/M16 Standard AEG series\u003cbr data-mce-fragment=\"1\"\u003ePrecision rotary dial design for fine hopup adjustments\u003cbr data-mce-fragment=\"1\"\u003eRe-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot\u003cbr data-mce-fragment=\"1\"\u003eRemovable Brass Threaded Slot Pin for setup and maintenance\u003cbr data-mce-fragment=\"1\"\u003eAccepted the nozzle length from 21.00mm to 21.25mm\u003cbr data-mce-fragment=\"1\"\u003eFully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs\u003cbr data-mce-fragment=\"1\"\u003eEquipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting\u003cbr data-mce-fragment=\"1\"\u003eEquipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight\u003cbr data-mce-fragment=\"1\"\u003eCompatible with any V2 gear boxes with 11mm or 11.5mm bore\u003cbr data-mce-fragment=\"1\"\u003eSpecially designed with BB Latching System to prevent dropping BBs after removing the magazine\u003cbr data-mce-fragment=\"1\"\u003eManually opened to release BBs from inside hopup chamber by hand\u003cbr data-mce-fragment=\"1\"\u003eThe Dual UV LED Boards and Module set and Single UV LED Board w\/ Clear Cover and Module set to glow BBs in the dark ready!\u003cbr data-mce-fragment=\"1\"\u003eThe Empty Magazine Detection Sensor to stop Motor\/HPA firing ready!\u003cbr\u003eSuitable For M4\/ M16 Series Electric Rifle Airsoft Guns \u003cspan data-mce-fragment=\"1\"\u003e(Include KRYTAC, Except KWA)\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpecification\u003c\/strong\u003e\u003cbr\u003eOverall Length: 51mm\u003cbr data-mce-fragment=\"1\"\u003eOverall Height: 37.75mm\u003cbr data-mce-fragment=\"1\"\u003eHub Outer Diameter (to fit into Gear Box): min 11mm - max 11.5mm\u003cbr data-mce-fragment=\"1\"\u003eHub Outer Diameter (to fit into Outer Barrel): min 12mm\u003cbr data-mce-fragment=\"1\"\u003eHub Inner Diameter (to fit Nozzle): max 8.3mm\u003cbr data-mce-fragment=\"1\"\u003eFeeder Outer Diameter (to fit magazine): min 9.25mm\u003cbr data-mce-fragment=\"1\"\u003eFeeder Length (to fit magazine): max 6.25mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Include:\u003c\/strong\u003e\u003cbr\u003e1 x CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit\u003cbr data-mce-fragment=\"1\"\u003e2 x Strong Clear Vinyl Cover\u003cbr data-mce-fragment=\"1\"\u003e1 x CNC Aluminum Standard-Hop Arm\u003cbr data-mce-fragment=\"1\"\u003e1 x CNC Aluminum R-Hop Arm\u003cbr data-mce-fragment=\"1\"\u003e1 x Silicone Rubber Standard-Hop Nub Damper\u003cbr data-mce-fragment=\"1\"\u003e1 x Silicone Rubber R-Hop Nub Damper\u003cbr data-mce-fragment=\"1\"\u003e1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub\u003cbr data-mce-fragment=\"1\"\u003e1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub\u003cbr data-mce-fragment=\"1\"\u003e1 x CNC Brass Threaded Slot Pin\u003cbr data-mce-fragment=\"1\"\u003e1 x CNC Delrin Locking C-Clip\u003cbr data-mce-fragment=\"1\"\u003e1 x CNC Barrel Brass Spacer\u003cbr data-mce-fragment=\"1\"\u003e1 x Brass Spacer Holder Oring\u003cbr data-mce-fragment=\"1\"\u003e3 x Steel Compression Spring\u003c\/span\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MAXX","offers":[{"title":"Default Title","offer_id":42807678107876,"sku":"MX-HOP005PRO","price":60.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1325\/2580\/products\/MX-HOP005PRO-1L.jpg?v=1650856243","url":"https:\/\/www.ehobbyasia.com\/ko\/products\/maxx-model-cnc-hopup-chamber-me-pro-for-m4-m16-aeg-airsoft-rifle-except-kwa","provider":"eHobbyAsia","version":"1.0","type":"link"}