{"product_id":"maxx-cnc-aluminum-hop-up-chamber-m4w-for-wolverine-mtw","title":"MAXX CNC Aluminum Hop Up Chamber M4W For Wolverine MTW","description":"\u003cp\u003eCNC Aluminum Hopup Chamber M4W unit is precisely machined to perform accurately and consistently on HPA MTW Milspec, Forged, Billet and MTW-9 series.\u003cbr\u003eThe Hopup Chamber M4W unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot.\u003cbr\u003eThe Hopup Chamber M4W unit is designed to accept the HPA MTW Engine M4 nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use.\u003cbr\u003eThe Hopup Chamber M4W unit is wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are optional)\u003cbr\u003eAlso mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eMAXX CNC Aluminum Hop Up Chamber M4W For Wolverine MTW\u003cbr\u003e\u003c\/b\u003eMachined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability\u003cbr\u003ePerformed accurately and consistently on HPA MTW Milspec, Forged, Billet and MTW-9 series\u003cbr\u003ePrecision Rotary Dial Knob for fine hopup adjustments\u003cbr\u003eRe-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot\u003cbr\u003eRemovable Steel Pivot Pin for ease of setup and maintenance\u003cbr\u003eAccepted the HPA MTW Engine M4 nozzle length\u003cbr\u003eFully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use\u003cbr\u003eWisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are sold separately)\u003cbr\u003eMounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots\u003cbr\u003eIncluded an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting\u003cbr\u003eEquipped with 2 compression springs on top and center to ensure the hopup unit is seated straight and air tight during use\u003cbr\u003eCompatible with any 11mm inner bore HPA Engine nozzle outlets\u003cbr\u003eThe Dual UV LED Tracer Module to glow BB in the dark ready!\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Includes: \u003c\/b\u003e\u003cbr\u003ex1 CNC Aluminum Hop-Up Chamber M4W unit\u003cbr\u003ex2 CNC Acrylic Side Cover\u003cbr\u003ex2 CNC Brass 2.6mm Side Wing\u003cbr\u003ex1 CNC Steel Pivot Pin\u003cbr\u003ex1 CNC Aluminum Hop-Up Lever\u003cbr\u003ex1 CNC Aluminum Soft Round Nub\u003cbr\u003ex1 CNC Aluminum Soft Flat Nub (4mm)\u003cbr\u003ex1 CNC Aluminum Hard Concave Nub (4mm)\u003cbr\u003ex3 Steel Nub Spring\u003cbr\u003ex1 CNC Steel Spring Guide\u003cbr\u003ex1 Steel Upper Compression Spring\u003cbr\u003ex1 Steel Center Compression Spring\u003cbr\u003ex1 CNC Delrin Locking C-Clip\u003cbr\u003ex1 CNC Brass Barrel Spacer\u003cbr\u003ex1 Brass Barrel Spacer Holder O-ring\u003cbr\u003ex1 CNC Aluminum Rotary Dial Knob\u003cbr\u003ex1 CNC Aluminum Inlet Adaptor (OD11mm)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification\u003c\/b\u003e\u003cbr\u003eOverall Length: 51.15mm\u003cbr\u003eOverall Height: 22mm\u003cbr\u003eInlet Adaptor Outer Diameter (to fit into HPA Nozzle Outlet): 11mm\u003cbr\u003eHub Outer Diameter (to fit into Outer Barrel): 12mm\u003cbr\u003eHub Inner Diameter (to fit Nozzle): 8mm\u003cbr\u003eMaterial: Aluminum 6061\u003cbr\u003e\u003c\/p\u003e","brand":"MAXX","offers":[{"title":"Default Title","offer_id":43798808428772,"sku":"MX-HOP010MW","price":83.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1325\/2580\/products\/MX-HOP010MW-1L.jpg?v=1676434787","url":"https:\/\/www.ehobbyasia.com\/ko\/products\/maxx-cnc-aluminum-hop-up-chamber-m4w-for-wolverine-mtw","provider":"eHobbyAsia","version":"1.0","type":"link"}