{"product_id":"maxx-cnc-aluminum-hop-up-chamber-m4p-pro-for-hpa-polar-star-rifle","title":"MAXX CNC Aluminum Hop Up Chamber M4P PRO For HPA Polar Star Rifle","description":"\u003cp\u003eCNC Aluminum Hopup Chamber M4P Pro (with BB Latching System) unit is precisely machined to perform accurately and consistently with HPA PolarStar Engines on standard M4\/M16 platform.\u003cbr\u003eThe Hopup Chamber M4P unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot.\u003cbr\u003eThe Hopup Chamber M4P unit is designed to accept the HPA PolarStar Engine M4 nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use.\u003cbr\u003eThe Hopup Chamber M4P unit is wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are optional)\u003cbr\u003eAlso mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting.\u003cbr\u003eMore than that, the Hopup Chamber M4P Pro unit is specially designed with a new BB Latching System to prevent BB dropping after removing the magazine. The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMAXX CNC Aluminum Hop Up Chamber M4P PRO For HPA Polar Star Rifle\u003c\/b\u003e\u003cbr\u003eMachined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability\u003cbr\u003ePerformed accurately and consistently with HPA PolarStar Engines on standard M4\/M16 platform\u003cbr\u003ePrecision Rotary Dial Knob for fine hopup adjustments\u003cbr\u003eRe-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot\u003cbr\u003eRemovable Steel Pivot Pin for ease of setup and maintenance\u003cbr\u003eAccepted the HPA PolarStar Engine M4 nozzle length\u003cbr\u003eFully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use\u003cbr\u003eWisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are sold separately)\u003cbr\u003eMounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots\u003cbr\u003eIncluded an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting\u003cbr\u003eEquipped with 2 compression springs on top and center to ensure the hopup unit is seated straight and air tight during use\u003cbr\u003eSpecially designed with a new BB Latching System to prevent BB dropping after removing the magazine\u003cbr\u003eThe Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber\u003cbr\u003eCompatible with any 11mm inner bore HPA Engine nozzle outlets\u003cbr\u003eThe Dual UV LED Tracer Module to glow BB in the dark ready!\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003cbr\u003e1 x CNC Aluminum Hopup Chamber M4P Pro (with BB Latching System) unit\u003cbr\u003e2 x CNC Acrylic Side Cover\u003cbr\u003e2 x CNC Brass 2.5mm Side Wing\u003cbr\u003e1 x CNC Steel Pivot Pin\u003cbr\u003e1 x CNC Aluminum Hopup Lever\u003cbr\u003e1 x CNC Aluminum Soft Round Nub\u003cbr\u003e1 x CNC Aluminum Soft Flat Nub (4mm)\u003cbr\u003e1 x CNC Aluminum Hard Concave Nub (4mm)\u003cbr\u003e3 x Steel Nub Spring\u003cbr\u003e1 x CNC Steel Spring Guide\u003cbr\u003e1 x Steel Upper Compression Spring\u003cbr\u003e1 x Steel Center Compression Spring\u003cbr\u003e1 x CNC Delrin Locking C-Clip\u003cbr\u003e1 x CNC Brass Barrel Spacer\u003cbr\u003e1 x Brass Barrel Spacer Holder Oring\u003cbr\u003e1 x CNC Aluminum Rotary Dial Knob\u003cbr\u003e1 x CNC Aluminum Inlet Adaptor (OD11mm)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification\u003c\/b\u003e\u003cbr\u003eOverall Length: 51.15mm\u003cbr\u003eOverall Height: 37.75mm\u003cbr\u003eInlet Adaptor Outer Diameter (to fit into HPA Nozzle Outlet): 11mm\u003cbr\u003eHub Outer Diameter (to fit into Outer Barrel): 12mm\u003cbr\u003eHub Inner Diameter (to fit Nozzle): 8mm\u003cbr\u003eFeeder Outer Diameter (to fit magazine): 8.85mm\u003cbr\u003eFeeder Length (to fit magazine): 6mm\u003cbr\u003eMaterial: Aluminum 6061\u003cbr\u003e\u003c\/p\u003e","brand":"MAXX","offers":[{"title":"Default Title","offer_id":43798835658980,"sku":"MX-HOP010MP","price":61.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/1325\/2580\/products\/MX-HOP010MP-1L.jpg?v=1676445172","url":"https:\/\/www.ehobbyasia.com\/ko\/products\/maxx-cnc-aluminum-hop-up-chamber-m4p-pro-for-hpa-polar-star-rifle","provider":"eHobbyAsia","version":"1.0","type":"link"}